Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in Downingtown: What to Know First

We provide independent Olympia Chimney chimney cap and crown service in Downingtown, typically completing standard cap replacements within one visit and crown repairs within two business days. Every job starts with a written price before any work begins - no exceptions - and includes our camera-scan inspection with a documented photo record under Haven Standard Clause 4. Olympia Chimney caps and crowns hold up well in Chester County’s freeze-thaw cycle, but we’ve found their standard galvanized caps on the Builder Series can rust through at the seams faster than owners expect when roof runoff pools behind the chimney. This page is for homeowners who need to know what failed, what it costs, and whether the fix can wait. Call us at (484) 558-2798 for a free estimate, or bring us a competitor’s written quote for our free second opinion.

Call (484) 558-2798

How Olympia Chimney Products Fail - and How We Fix Them

• Builder Series galvanized cap seam separation. The entry-level galvanized caps on Olympia Chimney’s Builder Series use a rolled seam at the lid joint that traps moisture from Downingtown’s spring rains and winter freeze-thaw. We see this open up after 6-10 years, not the 15-20 owners expect. We replace with a stainless steel cap from our Haven buying network or an Olympia Chimney stainless upgrade if the flue size demands it - the seam is welded, not rolled, and carries our 365-Day Done Right Promise.
• ProCap multi-flue cap undersizing on pre-1980 chimneys. Olympia Chimney’s ProCap line is spec’d for modern flue dimensions, but Downingtown’s East Brandywine corridor colonials and 1920s twins often have oversize flue tiles or multiple flues clustered tighter than current code allows. We measure with a tape, not a guess, and fabricate custom multi-flue caps through our Copperfield supply when stock ProCap dimensions would leave gaps that draw rain.
• ChimneySaver crown coating delamination on poured concrete crowns. Olympia Chimney’s ChimneySaver elastomeric crown coating works when applied to clean, sound concrete, but we’ve found it peels in sheets when applied over hairline cracks that weren’t routed first - a shortcut we see from painters who got into chimneys. We grind cracks to 1/4-inch depth, fill with HeatShield CrownSeal, then topcoat. The camera doesn’t guess. Neither do we.
• Chimney Crown FormaKit corner cracking in zero-lot-line homes. The FormaKit pre-formed crown system saves labor on new construction, but the corner segments lack reinforcement for the thermal stress of a Downingtown summer sun-to-winter freeze cycle. We see radial cracks at the corners after 3-5 years. Our fix: remove the FormaKit, pour a reinforced concrete crown with proper overhang and drip edge, then seal with Gelco CrownCoat.
• Spark arrestor mesh clogging on homes with Bradford pear or locust trees. Olympia Chimney’s standard 5/8-inch mesh spark arrestor meets code, but in Downingtown neighborhoods with mature landscaping - especially near Kerr Park and the borough’s older sections - seed pods and leaf debris pack the mesh by mid-October. We upgrade to a 3/4-inch mesh with a raised hood design that sheds debris, or install a Gelco cap with a built-in debris skirt if the flue configuration allows.

Our Olympia Chimney Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers 24/7. We book your camera-scan inspection, assign a named technician, and text you when they’re en route - Haven Standard Clause 2, Arrive on Schedule.
2. 2
   NFPA 211 Level 2 inspection. Corrine Halstead and our techs run a camera down the flue and photograph the crown, cap, and flue top from the roof. You get the footage and stills before we discuss price.
3. 3
   Written scope and price. We specify Olympia Chimney OEM versus quality aftermarket (DuraFlex, Gelco, Famco) based on availability and your flue configuration. The price, scope, and warranty are written and signed before work starts - Haven Standard Clause 1, Have It In Writing.
4. 4
   Repair or replacement. Cap swaps take 45-90 minutes. Crown repairs require cure time; we schedule return visits within 48 hours when needed. All materials come through our Haven buying network.
5. 5
   Post-work documentation. We run the camera again, photograph the completed work, and deliver your photo record with the invoice - Haven Standard Clause 4, documented on every job since 2009.
6. 6
   365-Day Done Right Promise. If the cap leaks or the crown cracks through our work, we make it right. The promise is stamped on every job.

Before

After

What Olympia Chimney Chimney Cap & Crown Costs in Downingtown

These are real Downingtown prices for work done under the Haven Standard - not teaser rates that balloon on site. A rusted Builder Series cap that’s dripping into the flue doesn’t get cheaper if you wait. Call (484) 558-2798 for your exact written price; estimates are free.

Why Downingtown Homeowners Call Level Two Chimney Downingtown for Olympia Chimney Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and we’ve learned that brand loyalty means nothing if the tech can’t name what’s wrong. Corrine trained in building trades and HVAC at SUNY Westchester before working flues from the ground up, and our crew knows Olympia Chimney’s product lines well enough to spot when a Builder Series cap is three seasons from failure versus three years. We’re independently owned and operated - not a franchise, not affiliated with Olympia Chimney - which means we source from DuraFlex, HeatShield, Gelco, and Famco through our Haven buying network when that’s the better part for your flue. Every job gets a written price first, a photo record last, and the 365-Day Done Right Promise in between.

FAQs